Have you ever had the wallet angle has been worn out?
We have experienced it.
From that experience,
"Which part, what kind of modification can you make a strong wallet?"
We are working together.
Everything depends on how you make it.
There are techniques: "Koba polishing" and "helicopter".
"Helicopter return" is a method of taking a table of the pasted leather for about 5mm, bending, and adding that part.
Folding the leather cannot be bent unless the original thick leather is thinned. In order to make it thinner, you have to make a leather, so the thinning parts are easily worn out.
This is the biggest factor in which the leather on the table is broken and cannot be used.
This method is commonly used, but it is suitable for mass production because the process is less than polished.
“Good thing is good for a long time”
For us who aim to make things that can be used, we have concluded that the technique of polishing is the best.
It is a very troublesome technique, but using this technique will not be worn out.
What are the criteria to choose?
Have you ever rubbed your wallet corner?
Carefully paste the leather on the front and back.
Carefully paste the leather on the front and back.
In order to neatly adjust the cross section of the pasted leather, we will cut it to the finished size.
This is called a book break.
In order to neatly adjust the cross section of the pasted leather, we will cut it to the finished size.
This is called a book break.
Remember the front and back of the cut leather.
There is the word "be careful", but that "mind". By adding heat with a trowel and applying further pressure, the glue will not penetrate and peel off the leather, and the look will be tightened, and a sense of depth will come out.
Normally, only the table is performed, but in Brooklyn, I am reminded of the back.
By doing so, it is an important process that will do your best for trivial parts so that you can use it for a long time.
Remember the front and back of the cut leather.
There is the word "be careful", but that "mind". By adding heat with a trowel and applying further pressure, the glue will not penetrate and peel off the leather, and the look will be tightened, and a sense of depth will come out.
Normally, only the table is performed, but in Brooklyn, I am reminded of the back.
By doing so, it is an important process that will do your best for trivial parts so that you can use it for a long time.
Polish the cross section of the leather with a file.
After that, add the dye. After the dye dries, polish it again with a file. By repeating this process over and over again, we will finish it into a beautiful koba. Although it is a very time -consuming process, this process is an important process for "no holes".
Polish the cross section of the leather with a file.
After that, add the dye. After the dye dries, polish it again with a file. By repeating this process over and over again, we will finish it into a beautiful koba. Although it is a very time -consuming process, this process is an important process for "no holes".
And another point of Koba polishing.
That is what you can repair.
Rather than letting go of the attachments that are attached, it will breathe back by repairing.
It is no exaggeration to say that each part is "powerful under the edge" and supports the product.
Brooklyn manufactures spend a lot of effort and time, up to the details of the parts.
Brooklyn's craftman is a sexuality that cannot be helped.
